PHYSICAL MECHANISMS OF RECOMBINATION PROCESSES IN SEMICONDUCTOR MATERIALS
Keywords:
Recombination, carrier lifetime, Shockley–Read–Hall statistics, radiative recombination, Auger recombination, surface recombination velocity, silicon.Abstract
Recombination of electron–hole pairs sets the carrier lifetime and, through it, the efficiency of solar cells, light-emitting diodes, lasers and bipolar devices. This article reviews the physical mechanisms of recombination in semiconductors: radiative band-to-band recombination, trap-assisted Shockley–Read–Hall (SRH) recombination, Auger recombination and recombination at surfaces and interfaces. For each mechanism the rate expression, the limiting lifetimes at low and high injection, the dependence on doping, temperature and band structure, and the practical ways of suppressing it are given. The mechanisms are then combined in a transparent calculation for crystalline silicon at 300 K, using representative coefficients and a mid-gap defect with a 1 ms SRH lifetime. In this model the radiative and Auger lifetimes become equal at a doping density of about 1.7×10¹⁶ cm⁻³, Auger recombination overtakes the SRH channel at about 6.0×10¹⁶ cm⁻³, and at 10¹⁹ cm⁻³ the total low-injection lifetime falls to about 0.0357 μs. A surface recombination velocity above roughly 100 cm/s limits the effective lifetime of a 200 μm wafer to below 100 μs. The calculation is illustrative: it uses simplified constants and does not reproduce the full parametrizations used in device simulation.
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.